GPSFileDepot.com
 

News:

Welcome to GPSFileDepot!

Main Menu

Any way to fix missing contours ?

Started by vt.flatlander, April 30, 2016, 10:12:50 AM

Previous topic - Next topic

vt.flatlander

I completed a topo of New Hampshire but I am less than happy with the fact that some parts of the map have 20 foot contours lines that just dead-end. The original TNM data is not as nice as I would like it to be and there is no State data set that I could find.
See attached.
Is there some method to fix this?

-Oz-

What you are seeing is a break in grids. For 1:24k contours the USGS determined the appropriate interval in a 7.5 minute grid (I believe). At the line the contour interval can change.

If you want perfect contours you can download the DEM elevation raw data and generate your own. At that point you'll pick one contour interval for the entire state. The old maps/old tutorial (the data is still there) did it that way; with the contour lines available I choose to accept the "ending of lines" to have a varying contour interval across the state.
Dan Blomberg
Administrator - GPSFileDepot
GPS Units: Garmin Dakota 20, Garmin GPSMap 60csx, Nuvi 255W, Nuvi 250W, ForeRunner 110, Fenix 2, Tactix Bravo, Foretrex 401
See/Download My Maps!

popej

Quote from: vt.flatlander on April 30, 2016, 10:12:50 AMI am less than happy with the fact that some parts of the map have 20 foot contours lines that just dead-end.
IMHO this looks good, better than full contours that can make a clatter. On my map I sometimes switch contours interval depending on height, this makes less clatter in mountains, but the solution on your picture seems to be more refined.