GPSFileDepot.com
 

Mapsource thinks the S. Rim of the Grand Canyon is @ 7,027 meters (23,154 feet)

Started by mlandman, January 09, 2009, 08:21:53 PM

Previous topic - Next topic

mlandman

OK, clearly the South Rim of the GC is at 7,027 feet, not meters. Here's how I got here...

  • Downloaded and installed Mapsource 6.14.1
  • Downloaded the AZ 1:24000 maps from here.
  • Loaded it into Mapsource
  • Found track information on the web
  • Put the data into a tab delimited file
  • Converted it with gpsvisualizer.com into NewHance.XML file
  • Renamed the XML to GPX
  • Opened NewHance.GPX with Map Source
  • Looked at the profile...

The profile has the correct length in miles, but has meters and feet reversed on the altitude. If I switch my "preferences" for altitude from feet to meters, Mapsource converts the track and puts the start at 7027 m. with the rim at 2134 m. It lists the trailhead at 23,154' and the Colorado river at 8,622'

When I load it into Google Earth, the route is clamped to the ground.

What did I do wrong?
Did I load the AZ map incorrectly?
Am I using the wrong tools?
Should I bring Oxygen to breath until I descend a few miles on the trail?  ;)

I am mystified.

As an aside, and possibly connected, when I draw a new route or track, I can not get Mapsource to show a profile. I do not know if that is connected but it seems like an anomaly.

I am attaching both the TXT and the GPX files and the original data file I massaged to extract the track I wanted.

TIA
Michael

-Oz-

Make sure you have version 1.25 (v1.2 had the error you mention).

I just loaded your track onto my Arizona map and it reads elevations between 7040ft and 2600ft.
Dan Blomberg
Administrator - GPSFileDepot
GPS Units: Garmin Dakota 20, Garmin GPSMap 60csx, Nuvi 255W, Nuvi 250W, ForeRunner 110, Fenix 2, Tactix Bravo, Foretrex 401
See/Download My Maps!