GPSFileDepot.com
 

News:

Welcome to GPSFileDepot!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - deepspace

#91
Map Making Support / Re: Topo Process Program (BETA!)
December 24, 2008, 08:27:25 AM
Washington. One other thing I noticed is that when you process the transport data in map edit, one checks from field then you do not have the MP_type option as I did when I manually did everything. What would be the field to select then?
Cheers-Marc
#92
Map Making Support / Re: Topo Process Program (BETA!)
December 23, 2008, 06:34:34 PM
Just thought I would let you know. Using the previous version when running the transportation it ran all counties in the state. The new version only ran 1 county, I did it several times and the same results.
Cheers-Marc
#93
Map Making Support / Re: Garmin mapsource headaces
December 23, 2008, 08:56:34 AM
Oz, Thanks I did find that, the map loaded correctly, everything is as I wanted. Now I am going to work on the whole state. Thanks again.
Cheers-Marc
#94
Map Making Support / Re: Garmin mapsource headaces
December 22, 2008, 07:46:04 AM
Duh! I admit in the 2 years since I got into these handhelds I had only opened map source 1 other time. Usually I use another map program to see where I have been but missing this was a real brain fart. Know to just figure the correct methods to get it on the hand held.
Thanks for helping out the blind!
Cheers-Marc
#95
Map Making Support / Re: Garmin mapsource headaces
December 21, 2008, 12:58:54 PM
I did find out the topo west part. I did use Mapsettools to create the files. I have them in a custom folder in Garmin. You see when I try to open the files in map source it always states its not a valid file format. That is why I just drug them over. Other than the large .img file here are the files created by mapsettoolskit:

FROM THE .REG FILE CREATED:
REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Garmin\MapSource\Families\Olympic Peninsula]
"ID"=hex:01,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Garmin\MapSource\Families\Olympic Peninsula\1]
"LOC"="C:\\washington\\final\\"
"BMAP"="C:\\washington\\final\\Olympic Peninsula.img"
"TDB"="C:\\washington\\final\\Olympic Peninsula.tdb"

FROM THE TDB:

P,   ,Olympic Peninsula d Olympic Peninsula D¦   Marc Hilt  NOB.BMP   gps_mapper   Mapset was created using MapSetToolKit 1.50   This map was created using free version of GPS_mapper Creator, 2000-2008 B*          n"  娠 Æ!  1§Olympic Peninsula L; Ø"¹      n"  娠 Æ!  1§Olympic Peninsula   á £ÖÐ ží  

FROM THE SMALLER .IMG FILE CREATED BY MAPSETTOOLS:
  l   DSKIMG                                 Ø  GARMIN  Preview Map                 ÿÿ                                                                                                                                                                                                                                                                                                                                                             àÿ                                                       Uª                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ09999999RGN°                    ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ09999999TREV                   ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ09999999LBLJ                   ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ} GARMIN RGN Ø  )}   3   °                           °                           °                                       J  ±[ÿ   yòd   Tl 
#  Oþ[ÿK   Oþ[ÿ yˆ
   "'  ¶                                                                                                                                                                                                                                                                                                                                                ¼ GARMIN TRE Õ  ) n" å¨ Æ! 1§     â   0   Ü           
                                    –˜     !  4   
  !             7y(–Îye 6y¹ 6y¹                   cgpsmapper version0097c DEFAULT   #        ¨ "Ú€T     €€ ¨ "±¥    € ¨ "±¥ 3   ˆ  JK                                                                                                                                                                                                                                 ì GARMIN LBL Ø  )  C    J           J           J          €J           J           J           J           J           J           J           ä €ì      J          J          J      .     J            map created with cgpsmapper P,S ÐP 0N8õ P<Á?<ÆM@À@S‰v¡š( £4
!APQ \• ...AÆœ=ÃÃÍIÃ<ß                                                                                                                                                                                     
#96
Map Making Support / Garmin mapsource headaces
December 21, 2008, 11:07:51 AM
Wondering if any one has had this happen. I created my .imp files placed into garmin custom folder. Map source would not show the maps, but thats not the issue. I dropped the files onto my micro sd disk. When I re-opened map source I ended up with a warning there is a problem with product 7 instillation, re-instal and open map source again. I went through all the registry issue's found on the net none of them solved the problem. So I removed everything, cleaned up the registry by hand and with Jv16 power tools. Did a fresh install from disk and upgrade down load to ver. 6. xx and still get the same error. Not only that I see my map on the sd card with the gamin file but do not see the map when I attempt to bring it up on the hand held (60 csx) geesh this is driving me nuts.
Thanks-Marc
#97
Map Making Support / Re: can not see it
December 15, 2008, 04:34:46 PM
got it sorted out, thanks!
#98
Map Making Support / Re: can not see it
December 14, 2008, 08:08:01 AM
from the header of the county boundaries
; Generated by GPSMapEdit 1.0.37.2

[IMG ID]
ID=
Name=
Preprocess=F
TreSize=1000
TreMargin=0.00000
RgnLimit=1024
POIIndex=Y
Copyright=2008 GPSFileDepot.com
DrawPriority=31
Marine=N
Levels=5
Level0=23
Level1=22
Level2=20
Level3=18
Level4=17
Zoom0=0
Zoom1=1
Zoom2=2
Zoom3=3
Zoom4=4
[END-IMG ID]:
Cheers-Marc
#99
Map Making Support / Re: can not see it
December 13, 2008, 09:53:35 AM
Thank you all for the help. I think I have it except when I try to create the .imp file I get a error the the layers must be ascending. I look at the properties and the layers are ascending. Is this common? Thanks-
#100
Map Making Support / Re: can not see it
December 10, 2008, 10:08:34 AM
I am wondering at this point if since IDL is not licensed and in demo mode if its timing out. Any chance any one knows about this?
#101
Map Making Support / Re: can not see it
December 09, 2008, 05:32:44 PM
I should have given more details. The DEM files are all about 235 megs, they have a lot of contours because of the Olympic mountains. I have the newest version of all of the software installed on a Toshiba laptop running xp with a gig of memory. I got the furthest on my last attempt all the way to 1411 out of 3417 intermediate contours.  ???
Cheers-Marc
#102
Map Making Support / Re: can not see it
December 09, 2008, 10:50:15 AM
well I actually mis-lead as to memory issue, problem is dem2topo gets to some point (say 1181 out 3417 intermediate contours) then just hangs there for hours doing nothing. So I need to use task manager to end the whole thing. I did turn off firewalls, anti virus programs in case they where some how interfering. Have you heard of such thing? Any suggestions?
Cheers-Marc
#103
Map Making Support / Re: can not see it
December 09, 2008, 07:24:19 AM
yes that was the error, case of can not see the problem staring right at the mistake. Now I am wrestling with what appears to be a common issue: DEM2TOPO and memory.
Read this post:    
http://forums.gpsfiledepot.com/index.php/topic,63.0.html but really it does not make sense to me how I control splitting the files into smaller segments with the command.
I searched the net and found no other solutions to make the dem files into say 4 small files instead of 1 huge one.
Cheers-Marc
#104
Map Making Support / Re: can not see it
December 08, 2008, 08:54:37 AM
I found the error. Thank you again for the help.
#105
Map Making Support / Re: can not see it
December 08, 2008, 08:47:34 AM
Using the same methods everything worked out fine for transportation, but the hydro still has the same error. Thanks again for all the help, it feels as though I am almost there, great site.
Cheers-Marc