Welcome, Guest. Please login or register.

Login with username, password and session length
Forums Search:  


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - korey99

Pages: [1]
1
Map Making Support / Re: Making maps from assembled tracks
« on: March 20, 2012, 02:56:48 PM »
Thank you all for your help.  Just to report back, here's what I did.  One thing I had neglected in my initial requirements is that of the people in my club use smartphones.

I found a pretty good source of data in the form of a JPG, which I calibrated and traced using ExpertGPS (which I had from years ago).   

The problem I ran in to was many of the viewing apps (mostly for smartphones) I used didn't care for tracks that consisted of multiple trksegs, in other words, resulting from tracks that branch or are not contiguous.  Expert GPS also doesn't provide a way to create a single track with multiple disconnected segments.  So, the original problem remained unsolved.

What I did was write a short XSLT (which is a way of transforming an XML file into a different format) to combine all segments with the same name into a single (possibly disconnected track).  That way I end up with a GPX with I think 4 tracks, one for each trail type and for creeks. 

So now, I've got two GPXs, one with simple tracks and another with combined tracks.  GPS units like the combined ones, but I use the simple one for editing and importing into other apps.

Also, for those users with modern Garmin GPS units I used ExpertGPS to export Custom Maps with the trails traced onto aerial photos.

So, in the end, I have files that can be used by old devices (like my eTrex Legend), smart phones, and modern units.  Sorry if it feels like I ignored your advice.  I looked into each of them, and I enjoyed the experimentation. 

After all that, I decided to look into uploading my traces to OSM after they've been validated in the real world.

2
Map Making Support / Making maps from assembled tracks
« on: March 14, 2012, 08:50:07 PM »
Hey all, first of all, thanks for the great resource.  I use a number of the maps made available here, and hope to able to contribute some day.

I've been working on a project to map out the trails in a local park for a club.  I took a bunch of recorded tracks and cleaned them up in ExpertGPS.  I also traced some trails from satellite imagery.  In the end, I have a GPX file with about 60 different tracks.  I thought this would work out, until I loaded this GPX onto my Oregon and discovered I'd have to enable showing each individual track on the map. 

Is there a solution?  Is using tracks for map data like this a bad idea?  I've downloaded a few of the trail map packages here in GPX format, and man, it's a hassle enabling individual tracks.

Thanks,
Korey

3
GPSr Units / split: Duplicate map entries on GPS?
« on: November 01, 2011, 09:31:16 AM »
For what it's worth, I'm the OP from the original, and I wanted to report back that the problem the My Trails map has been resolved for me as well.  Thanks for the help.

Korey

4
GPSr Units / Re: Duplicate map entries on Garmin Oregon?
« on: October 27, 2011, 06:33:03 AM »
Ok, thanks for the response.  It's no big deal, I just wanted to make sure I wasn't doing something wrong.  I have the same problem with the "Illinois Topo" maps, which give two copies on the map list.

Thanks again,
Korey

5
GPSr Units / My trails multiple copies on oregon 450
« on: October 27, 2011, 05:52:40 AM »
Hello all-

I've been having good luck with the maps here, with one exception.  When I install some certain maps onto the SD card of my Garmin Oregon, I get multiple entries in the list of installed maps (the one you see when you go into Setup > Map > Select Map).

I use BaseCamp, and have a number of maps installed (IL topo, My Trails, NE USA Topo part 1 and 2, etc.).  I renamed all the .img files on my Oregon card to another extension (so I have no extra maps available).  Then I used BaseCamp to install maps.  I selected the "My Trails-High Quality Trail and POI Maps" and selected all segments and installed them.

I've done this multiple times, and each time I get those multiple entries in the list.  Is this a known issue?  Am I doing something wrong?

Thanks,
Korey

Pages: [1]
anything