GPSFileDepot Forums

General Category => General Discussion => Topic started by: Rob24189 on March 25, 2011, 06:38:07 PM

Title: Slow learner questions
Post by: Rob24189 on March 25, 2011, 06:38:07 PM
Hi Folks,
I hope you all can tolerate another round of newbie questions. I'm very new to all this.

Just purchased a Garmin 60 csx and I'm taking it step by step. I'm going through the Owner's Manual. So far I been able to mark, name and delete waypoints. I've  also used the track log feature. I have much to learn with the unit it's self as I make my way through the manual.

I'm a bit confused on the computer side of this. I'm using an iMac. I downloaded Base Camp and the New Hampshire TOPO map on this site.

Question: Am I able to open and use the downloaded map (NH TOPO) on the computer? If yes how do I do it?

Thanks in advance,
Rob
Garmin 60CSx
iMac 2010
Title: Re: Slow learner questions
Post by: Indrid Cold on March 25, 2011, 09:20:12 PM
This one will work for you:
http://www.gpsfiledepot.com/maps/view/157/

Just make sure you get the Mac edition.

With that gps, you will need a microSD card installed to hold maps.

Start there and we will give you some more tips
Title: Re: Slow learner questions
Post by: Rob24189 on March 26, 2011, 05:59:14 AM
Quote from: Indrid Cold on March 25, 2011, 09:20:12 PM
This one will work for you:
http://www.gpsfiledepot.com/maps/view/157/

Just make sure you get the Mac edition.

... you will need a microSD card installed to hold maps.




Thanks Indrid Cold,
I'll check out that map, and the unit came with a 1G card.

Am I able to open (see) that map on the computer or is that only to install on the GPS?

Thanks for the reply,
Rob
Title: Re: Slow learner questions
Post by: Boyd on March 26, 2011, 06:05:41 AM
Download and install Basecamp first on your Mac: http://www8.garmin.com/support/download_details.jsp?id=4449

Now download the Mac version of that map. I haven't used that one, but usually all you need to do is double-click the downloaded file to install it. Now start Basecamp and follow these instructions (Mac part is towards the end): http://www.gpsfiledepot.com/tutorials/how-to-load-maps-on-my-garmin-gps-unit/

The map will be installed for use on your computer and you can send either all or part of it to your 60csx.
Title: Re: Slow learner questions
Post by: Rob24189 on March 26, 2011, 06:08:21 AM
Quote from: Rob24189 on March 26, 2011, 05:59:14 AM
Am I able to open (see) that map on the computer....

Found it....Base Map....Maps....NewEnglandTopo.....I'm there!
Title: Re: Slow learner questions
Post by: Boyd on March 26, 2011, 06:32:33 AM
That's Basecamp.... a basemap is something completely different.  :)

Glad it's working for you!
Title: Re: Slow learner questions
Post by: Rob24189 on March 26, 2011, 03:17:02 PM
Quote from: Boyd on March 26, 2011, 06:32:33 AM
That's Basecamp.... a basemap is something completely different.  :)

Glad it's working for you!

Basecamp.....correct.

Thanks for the help!
Rob
Title: Re: Slow learner questions
Post by: MichaelJ07 on March 27, 2011, 09:06:01 PM
Strap yourself in and please remain seated during the entire ride cause you're about to have the most thrilling time of your life with that 60csx!  :)
Title: Re: Slow learner questions
Post by: Rob24189 on March 28, 2011, 04:26:32 PM
Quote from: MichaelJ07 on March 27, 2011, 09:06:01 PM
Strap yourself in and please remain seated during the entire ride cause you're about to have the most thrilling time of your life with that 60csx!  :)

Thanks MichaelJ!

I'm really looking forward to reaching that first summit and pressing the "mark" button!

I just hope I remember to look up form the GPS to enjoy the "views from the top" ;)

Rob